









Air fryer or microwave oven is completely unresponsive when the power button is pressed or the door is closed – a failed KW7-0 switch breaks the control circuit.
Appliance starts randomly or stops mid-cycle; worn switch contacts cause an unstable connection that cuts power unpredictably.
Unit powers on but heating element never activates, or the cooking cycle halts before completion due to an open-circuit micro switch not signaling the control board.
The characteristic snap-action click is absent when pressing the door latch or control button, indicating the internal mechanism or contacts have failed.





💡 Pro Tip: Is Your KW7-0 Micro Switch the Culprit?
Your part is likely the culprit if you notice any of the following:
⚠️ Air fryer or microwave completely unresponsive when the door is closed or button is pressed
⚠️ Appliance starts intermittently – works sometimes but not others
⚠️ Heating cycle stops mid-cook with no error code displayed
⚠️ Audible click is missing when pressing the power/door button
🔍 Diagnostic Tip: Set a multimeter to continuity mode. With the switch at rest (normally open), probes on COM and NO terminals should show open circuit; pressing the actuator should give an immediate beep/continuity. If the switch fails to change state or shows intermittent continuity, replacement is confirmed. Always unplug the appliance before testing.
📦 What's in the Box
✅ 1× KW7-0 Micro Switch (16A 125V/250V, SPDT, normally open, 29×16×10 mm)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.