




Drive belt is broken or stretched — drum stops turning during wash or spin cycle.
Worn pump belt can no longer drive the pump impeller, leaving standing water in the drum after the cycle.
A slipping or glazed belt produces loud squealing sounds at the start of the wash or agitation cycle.
A belt that is slipping, cracked, or misaligned generates heat and produces a noticeable burning rubber odor during operation.
A stretched or unevenly worn belt causes imbalance and vibration, especially during the rinse and spin cycles.




💡 Pro Tip: How to Know If Your Belts Have Failed
Your part is likely the culprit if you notice any of the following:
⚠️ Washer drum does not spin or agitate during the wash cycle
⚠️ Standing water in the drum — tub is not draining after the cycle
⚠️ Loud squealing or squeaking noise at the start of the wash or spin cycle
⚠️ Burning rubber smell coming from the laundry room during operation
👨🔧 Technician Tip: Tilt the washer back to visually inspect both belts from underneath. A worn belt will show cracking, glazing (shiny surface), or fraying along the edges. Always replace the drive belt and pump belt together as a set — if one has failed, the other is likely near the end of its service life too. After installing new belts, confirm tension by manually rotating the drive pulley before powering on.
📦 What's in the Box
✅ 1× Drive Belt 211125 (42"L × 1/2"W × 5/16"H, V-type, rubber with dry-back cover)
✅ 1× Pump Belt 211124 (~40-1/2"L × 3/8"W, V-shaped, rubber with friction cover)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.