Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Oven runs but the broil element produces no heat and shows no red glow — the most common failure mode caused by a burned-out internal coil.
Food browns only on one side or not at all during broil mode, indicating a partially failed element or internal hotspot damage.
Self-cleaning function will not initiate or complete because it relies on the broil element to reach the required high temperature.
Physical breaks, blisters, or burn-through spots are visible on the element coil, causing intermittent or total loss of broil function.
💡 Pro Tip: Is Your Broil Element the Cause?
Your part is likely the culprit if you notice any of the following:
⚠️ Oven runs but produces no heat on the broil or self-clean setting
⚠️ Food browns unevenly or not at all during broiling
⚠️ Element shows no visible red glow when the broil mode is active
⚠️ Visible burn marks, blistering, or breaks on the element coil
To confirm: set the oven to Broil and watch through the oven window — the element should glow bright red within 60 seconds. No glow = failed element. Also test continuity with a multimeter; a reading of OL (open circuit) confirms the element needs replacement.
📦 What's in the Box
✅ 1× Broil Element WB44X173 (3,400W / 250V, screw-on terminals, approx. 12" W × 16" L)
⚠️ Note: Mounting bracket is NOT included — reuse your existing bracket if present.
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.