Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Drawer requires excessive force to open or close. Worn or cracked rear glide clips fail to support smooth travel along the range frame, causing the drawer to bind or jam.
The back of the drawer droops when pulled out, indicating the rear glide clip has broken away from its mounting slot at the rear corner of the drawer.
Metal-on-metal scraping or loud banging when operating the storage drawer, caused by a missing or shattered glide clip allowing bare metal contact between the drawer and range body.
Drawer derails completely or tilts to one side when pulled out, typically because both rear glide clips have failed simultaneously, removing all rear-corner support.
💡 Pro Tip: Is Your Oven Drawer Glide the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Drawer is hard to open or close — requires excessive force every time
⚠️ Drawer sags or droops at the rear when pulled out
⚠️ Uneven movement or the drawer sticks halfway in or out
⚠️ Loud scraping, grinding, or banging noise when operating the drawer
🔍 Diagnostic tip: Pull the drawer fully out and inspect the two rear corners. Broken, cracked, or missing plastic clips are a definitive sign the 3051163 rear glides need replacement. While you're at it, check the front glides (3051162) — replace all four at once for even wear and the smoothest operation.
📦 What's in the Box
✅ 1× Rear Drawer Glide 3051163 (white plastic, snap-fit clip — order qty 2 for a complete rear replacement)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.