




Oven bakes unevenly or food is consistently undercooked on one side due to inaccurate temperature readings from a failing sensor.
Oven reaches set temperature then falls significantly (e.g., from 350°F down to 225°F) as the defective sensor sends incorrect signals to the control board.
Oven overshoots the set temperature and overheats, scorching food, caused by a sensor that reads lower than actual oven temperature.
Control board displays E-28 or similar error codes indicating a shorted or open-circuit temperature sensor that must be replaced.
Oven gets stuck at ~150°F and will not climb to set temperature on bake or convection modes, while broil may still function normally.
💡 Pro Tip: How to Know If Your Oven Temperature Sensor Is Bad
Your part is likely the culprit if you notice any of the following:
⚠️ Oven heats unevenly or baked goods are consistently undercooked or burnt
⚠️ Oven temperature drops significantly after reaching the set point (e.g., set 350°F but falls to 225°F during cooking)
⚠️ Oven displays error codes such as E-28 indicating a shorted or open sensor circuit
⚠️ Oven stuck at a low temperature (e.g., 150°F) or overheats beyond the set temperature
🔬 DIY Test: Unplug the range. Remove the sensor and measure resistance across the connector pins with a multimeter. A healthy sensor reads approximately 1080–1100 Ω at room temperature. If reading is open (OL) or drastically off, replace the sensor. Resistance should increase ~2 Ω for every 1°F of temperature rise.
📦 What's in the Box
✅ 1× Oven Temperature Sensor / Thermistor (PT1000, 3.9" probe, 3.2" harness, 1.7" bracket, with mounting screw)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.