Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
The timer dial does not move during a timed dry cycle, causing the dryer to run indefinitely without progressing through drying stages.
Dryer continues to run past the set time and does not shut off automatically at cycle end, leading to over-dried or heat-damaged fabrics.
The dryer fails to begin a cycle when the timer is turned to the timed dry setting, due to failed electrical contacts inside the timer mechanism.
Dryer operates normally on some cycle positions but fails on timed dry settings, indicating burnt or melted contacts within the timer.
Clothes come out damp after a full cycle because the timer is not properly sequencing the heating and motor circuits for a complete drying cycle.
💡 Pro Tip: Diagnosing a Faulty Dryer Timer
Your part is likely the culprit if you notice any of the following:
⚠️ Timer dial does not advance during a timed dry cycle
⚠️ Dryer runs but will not stop at the end of a cycle
⚠️ Dryer fails to start or only works on specific settings
⚠️ Clothes remain damp or come out over-dried after a normal cycle
⚙️ Important: The timer will NOT advance in an automatic cycle if the dryer is not heating properly. Always verify the thermal fuse and heating element are functioning before replacing the timer. Use a multimeter to test timer contacts against the wiring diagram to confirm failure before ordering.
📦 What's in the Box
✅ 1× Dryer Timer Assembly W10185992 (115V AC / 60Hz, includes timer knob shaft)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.