




Corroded or cracked sleeve allows water to escape at hose connection
Clogged nozzle reduces water flow causing slow or incomplete fill cycles
Corroded injector deposits rust particles into wash load




💡 Pro Tip: Confirm the Injector Is Leaking
Your part is likely the culprit if you notice any of the following:
⚠️ Water dripping from the top-left corner of the washer
⚠️ Visible rust staining or mineral deposits around the nozzle
⚠️ Hissing sound or slow fill during the fill cycle
⚠️ Injector sleeve is cracked, split, or visibly corroded
Lift the washer top and watch during a fill cycle. Active dripping from the sleeve-to-hose connection, rust staining on the outer tub wall, or a hissing restricted-flow sound all confirm the injector — not the inlet valve or the tub seal.
📦 What's in the Box
✅ 1x Injector Sleeve
✅ 1x Nozzle
✅ 2x Worm Clamps
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.