





Washer drum does not fill with water or fills extremely slowly during the wash cycle.
Cold water continuously leaks into the washer tub even when the machine is off or between cycles.
Samsung displays a 4E fault code indicating a water supply or inlet valve failure.
Machine halts during the fill phase and will not advance to the wash or rinse cycle.
Cold water inlet valve failure causes water to back up and leak out through the detergent dispenser drawer.
💡 Pro Tip: Is Your Water Inlet Valve Failing?
Your part is likely the culprit if you notice any of the following:
⚠️ Washer fills with water slowly or not at all
⚠️ Water leaks through the detergent dispenser tray during fill cycle
⚠️ Samsung 4E error code displayed (water supply problem)
⚠️ Washer stops mid-cycle without completing the fill phase
Use a multimeter to test the solenoid coil for continuity. No continuity = valve is failed and must be replaced. Always shut off the water supply and unplug the washer before beginning any repair.
📦 What's in the Box
✅ 1× Water Inlet Valve (120V / 60Hz, single-coil cold water, compatible with DC62-30314V)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.