Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer runs normally but steam function does not activate; no moisture is introduced into the drum during a steam or wrinkle-care cycle.
Water drips or pools underneath or behind the dryer during or after a steam cycle, indicating the valve is stuck open or the solenoid seal has failed.
The control board activates the steam cycle and the timer runs, but no steam is generated because the valve solenoid coil has lost continuity.
Dryer displays a water inlet or steam supply error on the control panel, signaling the valve is not opening to allow water flow.
The Wrinkle Care or Steam Sanitize cycle cannot be selected or exits immediately without completing, caused by a failed inlet valve preventing water from entering the steam generator.
💡 Pro Tip: Is Your Dryer's Steam Water Valve the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer steam function does not activate or produces no steam
⚠️ Water leaking from the rear or bottom of the dryer during a steam cycle
⚠️ Wrinkle Care or Steam Sanitize cycle starts but clothes come out completely dry
⚠️ Dryer control panel shows a water supply error during steam cycle
Before ordering, verify the water supply line at the back of the dryer is turned on and kink-free. If the line is fine and the dryer still fails to steam, the inlet valve solenoid has likely failed. A simple multimeter continuity test on each solenoid coil will confirm — no continuity means a failed coil and the valve must be replaced.
📦 What's in the Box
✅ 1× DC62-30042A Dual-Port Steam Water Inlet Valve (110/120V, 60Hz, 3.36 in × 4.25 in)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.