Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer runs but produces little or no heat. The failed thermistor sends incorrect temperature data to the control board, causing the heating element to stay off or cycle irregularly.
LG dryer displays TE1 or TE2 fault code on the control panel. These codes indicate an open or shorted thermistor circuit that the control board can no longer read correctly.
Clothes remain damp after a full cycle, requiring two or more runs to dry. An out-of-range thermistor causes the control board to underestimate drum temperature and reduce heat prematurely.
Cycle ends or heating stops well before clothes are dry. A thermistor reading too high tricks the control board into thinking the dryer has reached the target temperature.
Automatic dry cycles fail to complete or stop advancing the timer. Inaccurate thermistor resistance values disrupt the feedback loop that governs heat output and cycle progression.
💡 Pro Tip: How to Diagnose a Bad Dryer Thermistor
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer displays TE1 or TE2 error code on the control panel
⚠️ Clothes take 2–3 cycles to fully dry (insufficient or inconsistent heat)
⚠️ Dryer overheats or shuts off prematurely during a cycle
⚠️ Auto-dry cycle ends too early or never advances the timer
🔬 Test with a multimeter set to resistance (Ω). At room temperature (~70°F / 21°C), a healthy thermistor reads approximately 9,300 ohms. A reading of 0Ω (short) or OL (open circuit) confirms the thermistor has failed and must be replaced. Always unplug the dryer before testing or replacing any part.
📦 What's in the Box
✅ 1× Dryer Thermistor Assembly with Wire Harness (8-7/16" / 214mm, NTC type)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.