Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Tub fills with water but fails to spin or rotates very slowly — worn clutch lining can no longer engage transmission to basket.
Laundry remains soaking wet after the cycle ends because the tub never reaches full spin speed due to clutch slip.
Friction odor during spin cycle caused by the degraded lining material overheating as it slips against the clutch hub.
Screeching or grinding sound when the washer attempts to transition from agitate to spin, indicating lining wear or glazing.
💡 Pro Tip: Is Your Clutch Band the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Washer fills with water but tub does not spin or spins very slowly
⚠️ Clothes come out soaking wet after the spin cycle completes
⚠️ Burning rubber or friction smell during the spin cycle
⚠️ Loud squealing or grinding noise when transitioning to spin
🔍 Diagnosis tip: Pull the agitator and inspect the clutch band visually. If the lining pads are worn flat, glazed, or crumbling, replace the clutch band assembly immediately. Do NOT attempt to run the washer with a worn clutch — it can damage the transmission.
📦 What's in the Box
✅ 1× Clutch Band and Lining Assembly (4-1/2"L × 4-1/4"W × 9/16"H, Metal/Plastic, White/Gray)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.