






Fridge or freezer section fails to reach set temperature because the evaporator fan has stopped circulating cold air over the coils.
Worn motor bearings cause a whining, grinding, or rattling noise from the freezer compartment during normal operation.
A failed fan allows frost and ice to accumulate on the evaporator coils due to insufficient airflow, eventually blocking cooling entirely.
Fan blade does not spin at all — motor has seized or experienced an electrical failure, resulting in warm spots throughout both compartments.





💡 Pro Tip: Is Your Evaporator Fan Motor the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Refrigerator fresh food or freezer section not cooling properly despite compressor running
⚠️ Loud, grinding, or unusual noise coming from the freezer fan area
⚠️ Excessive frost or ice buildup on the evaporator coils in the freezer compartment
⚠️ Fan blade is completely stopped and will not spin when power is applied
🔍 Quick Test: Unplug the refrigerator and try spinning the fan blade by hand. If it does not spin freely, replace the motor. If it spins freely, use a multimeter to check for continuity across the motor terminals — no continuity confirms a failed motor.
📦 What's in the Box
✅ 1× Evaporator Fan Motor with 2-Wire Harness Assembly (115V / 60Hz / 3.3W, body: 3-1/4"L × 2-3/8"W × 3-3/8"H, harness: 3-7/8"L)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.