GE Refrigerator Evaporator Fan Motor Parts — Models & Compatibility

When your GE fridge starts running constantly or clicking without cooling, the evaporator fan motor's often the culprit. This hub covers the WR60X23584 replacement motor that fits over 200 GE, Hotpoint, and RCA refrigerator models — from side-by-sides to French door units built between 2008 and 2020.

Is This the Right Part for Your Model?

Check your model number on the inside wall of the fresh food section (usually upper left). If you're seeing "too warm" issues in both compartments or hearing clicking sounds, but the compressor runs fine, you'll want to verify the evaporator fan isn't seized. This motor (replaces AP5955766, WR60X10141, WR60X10346) is a direct fit for 36000, 38000, and A3300 series models.

About This Replacement Motor

The evaporator fan circulates cold air from the freezer coils throughout both compartments. When it fails, you'll notice the freezer's warmer than normal while the fridge section runs constantly trying to compensate. Common symptoms include noisy operation (grinding or squealing), clicking sounds when the compressor cycles, or the fridge running nonstop. Most failures happen when the motor bearings wear out or ice buildup jams the fan blade. This is a straightforward 15-30 minute repair — you'll need basic screwdrivers and possibly a socket set to remove the back panel in your freezer compartment.

What Customers Report After Replacement

"Fridge is up & running" — that's the typical result once this motor's swapped in. The repair difficulty's rated easy because you're working with just a few screws and an electrical connector. No refrigerant handling, no special tools required. Most DIYers complete the job during a lunch break.