





Element fails to produce any heat when turned on – coil does not warm up or glow. Caused by internal wire burnout or broken coil.
Burner takes unusually long to heat or only one section of the coil glows, resulting in uneven cooking temperatures.
Visible green corrosion or carbon scoring on the element's plug prongs causes poor contact and intermittent or complete loss of heat.
Element causes the circuit breaker to trip immediately upon activation, indicating an internal short circuit within the coil.





💡 Pro Tip: Is Your 6" Burner the Culprit?
Your part is likely the culprit if you notice any of the following:
⚠️ Burner coil fails to heat up at all when turned on
⚠️ Element heats slowly or only partially glows red
⚠️ Visible cracks, blistering, or burn spots on the coil surface
⚠️ Circuit breaker trips when the burner is switched on (indicating an internal short)
🔍 Quick Test: With the range unplugged, pull the element straight up and out of its receptacle. Inspect the two terminal prongs for green corrosion or carbon scoring. A corroded receptacle block (part 330031) is often the root cause — replace both together for a lasting fix.
📦 What's in the Box
✅ 1× MP15YA 6" Coil Surface Burner Element (1500W / 240V / 4-Turn / Y-Bracket)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.