Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Heating element fails to activate at the end of the wash cycle, leaving dishes wet or damp after the drying phase completes.
Dishwasher runs full cycle but water remains cold or lukewarm, resulting in poor cleaning performance and residual food debris on dishes.
Control board detects insufficient water temperature and extends the cycle duration trying to compensate for a failing or failed heating element.
Dishwasher displays error codes such as HE, tE, or 5C/5E on Samsung models, indicating the heating element circuit has failed continuity check.
💡 Pro Tip: Is Your Heating Element the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Dishes come out wet or damp after a full drying cycle
⚠️ Water inside the tub is cold or lukewarm during the wash cycle
⚠️ Dishwasher displays an error code related to heating (e.g., HE, tE, or 5E on Samsung models)
⚠️ Wash cycle runs longer than normal or food residue remains on dishes
🔍 To confirm failure, set a multimeter to Rx1 and probe the element terminals — a reading of 15–30 Ω is normal; an open (OL) or shorted (0 Ω) reading confirms replacement is needed. Always unplug the dishwasher before testing.
📦 What's in the Box
✅ 1× Dishwasher Heating Element DD81-02148A (approx. 14.75" H × 14.50" W × 3.25" D, nickel-chromium alloy, with mounting hardware)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.