Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dishes come out dirty or with food residue — the circulation pump motor has failed to deliver adequate water pressure to the spray arms.
Upper or lower spray arms remain stationary during the wash cycle due to insufficient water flow from a worn pump motor.
A failing motor bearing causes audible humming, buzzing, or grinding sounds during the wash cycle.
A shorted or failing circulation pump motor can cause repeated GFCI outlet trips, preventing the dishwasher from completing a cycle.
Incomplete water circulation can leave pooled water at the bottom of the tub after a cycle has finished.
💡 Pro Tip: Is Your Circulation Pump the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Dishes come out dirty, greasy, or with food residue despite a full cycle
⚠️ Spray arms are not spinning or water pressure feels noticeably weak
⚠️ Dishwasher hums loudly, makes grinding noises, or trips a GFCI outlet
⚠️ Standing water remains in the tub after a wash cycle completes
Confirm the motor is the fault by spinning the spray arms by hand — if they move freely but still don't rotate during a cycle, the circulation pump motor and/or its capacitor has likely failed. Always unplug the dishwasher before inspection.
📦 What's in the Box
✅ 1× Dishwasher Circulation Pump Motor (IC-77225SSDWB-1, replaces DD81-01640A)
✅ 1× Run Capacitor (C61-P2, pre-matched to motor)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.