Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Lower dishrack sticks, drags, or requires excessive force to slide in and out — caused by cracked, worn, or missing roller wheels on the rack corners.
The lower dishrack tilts or leans to one side inside the tub due to one or more missing or collapsed rollers no longer supporting the rack evenly.
Audible scraping or grinding sound when moving the lower rack indicates worn rollers with flat spots or a missing axle causing metal-on-rail contact.
A dragging or misaligned lower rack prevents the spray arm from spinning freely, reducing wash coverage and leaving dishes dirty.
💡 Pro Tip: Is Your Lower Dishrack Roller the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Lower dishrack sticks, drags, or struggles to slide in and out smoothly
⚠️ Visible cracks, flat spots, or missing wheels on the lower rack corners
⚠️ Dishrack sits unevenly or tilts to one side inside the tub
⚠️ Grinding or scraping noise when pulling out or pushing in the lower rack
🔍 Tip: Pull out the lower rack and flip it over — inspect all four corner wheel positions. Even one missing or cracked roller will cause the entire rack to drag. Replace in sets of 4 for even wear and the smoothest glide.
📦 What's in the Box
✅ 1× Lower Dishrack Roller Wheel (white plastic, ~1-3/4" dia. × 3/4" wide)
✅ 1× Clip-On Axle / Stud
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.