Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dishwasher shifts, vibrates, or rocks side-to-side while running because the upper mounting bracket is bent, broken, or missing.
Unit tips or leans forward when the door is opened or racks are pulled out, indicating the bracket is no longer holding the tub against the counter.
An unstable dishwasher frame caused by a failed bracket allows the tub to shift, misaligning the door latch and preventing a proper seal.
Banging or rattling noise during wash cycles caused by the dishwasher moving freely instead of being secured firmly under the counter.
💡 Pro Tip: Is Your Mounting Bracket the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Dishwasher shifts, rocks, or vibrates excessively during a wash cycle
⚠️ Unit tilts forward when you open the door or pull out the racks
⚠️ Difficulty latching or fully closing the dishwasher door
⚠️ Visible gap between the top of the dishwasher and the underside of the counter
🔍 Tip: Pull the dishwasher out slightly and inspect both left and right brackets — they typically wear at the same rate, so if one is bent or broken, replace both at the same time to restore full stability.
📦 What's in the Box
✅ 1× Dishwasher Upper Mounting Bracket (all-metal, part 8269145 / WP8269145) — screws sold separately
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.