Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer door fails to latch or lock at the start of a cycle, preventing the machine from running.
Washer displays error codes dL, dE, FL, or DC and refuses to begin a wash cycle due to a faulty door lock signal.
Washer completes the cycle but the door remains locked and cannot be opened — solenoid stuck in engaged position.
Machine makes buzzing or clicking sounds while attempting to lock the door but fails to complete the lock sequence.
Washer stops mid-cycle and displays a door lock fault because the switch loses contact during operation.
💡 Pro Tip: How to Know If DC64-00652D Is Your Problem
Your part is likely the culprit if you notice any of the following:
⚠️ Washer door won't lock or latch at the start of a cycle
⚠️ Washer won't start — displays a door lock error code (dL, dE, FL, or DC)
⚠️ Door unlocks mid-cycle or fails to release after the cycle ends
⚠️ Buzzing or clicking sounds when the machine attempts to lock the door but fails
🔍 Diagnostic tip: Use a multimeter set to continuity mode across the lock switch terminals. A failed switch will show no continuity when actuated. Also inspect the wire harness connector for burn marks or corrosion before replacing the switch — a shorted harness can destroy a new lock switch quickly.
📦 What's in the Box
✅ 1× Washer Door Lock Switch Assembly — DC64-00652D compatible (AC120V / 60Hz solenoid interlock)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.