Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Eliminates metal-on-metal grinding or squealing sounds caused by worn front glide pads dragging against the drum.
Stops black scuff marks and fabric snags that occur when a deteriorated glide allows the drum to contact the metal bulkhead rim.
Restores smooth drum rotation when excessive friction from failed glides causes the tumbler to hesitate or stop mid-cycle.
Cork pad cushions vibration and absorbs heat, reducing overall noise and wear on the front cabinet panel during operation.
💡 Pro Tip: Is Your Front Glide the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Loud metal-on-metal squealing or grinding noise while the dryer runs
⚠️ Black scuff marks or small snags appearing on clothes after drying
⚠️ Drum sticking, hesitating, or stopping mid-cycle
⚠️ Visible wear, cracking, or missing glide/pad on front bulkhead rim
🔍 Diagnostic tip: Open the dryer door and manually rotate the drum by hand. If you feel rough resistance or hear scraping, the front glide is worn. Always replace both left and right glides at the same time (2 kits per appliance). While the front bulkhead is off, inspect the drum felt seal — replace it simultaneously if frayed or torn.
📦 What's in the Box
✅ 1× Blue Plastic Drum Glide (front-mount, bulkhead rim style)
✅ 1× Brown Cork Cushion Pad (heat & vibration damping)
✅ 2× Rust-Proof Steel Rivets (1/8" pop rivet compatible)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.