Maytag Dryer Tumbler Front Glide Bearing Parts — Models & Compatibility

If your Maytag dryer sounds like it's grinding gravel every time you start a load, there's a good chance the front glide bearings have worn through. This 306508 kit includes the Teflon-coated bearing strips that support the front rim of your drum — when they fail, metal scrapes on metal, and that noise tells you everything you need to know. This hub covers compatibility across Maytag's LDE, MDE, and MDG series dryers, plus select Whirlpool, Jenn-Air, and Crosley models that share the same drum support design.

Is This the Right Part for Your Model?

Check your dryer's model number — it's usually on a sticker inside the door frame or on the back panel near the power cord. Match it against the compatibility list below. This bearing kit fits over 200 Maytag dryer models from the early 2000s through mid-2010s, primarily electric models in the MDE and LDE lines. The part replaces AP4037304, 306508VP, PS1804752, and 312941, so if you're cross-referencing an old repair estimate, those numbers confirm you're looking at the same component.

About This Replacement Part

The front glide bearing kit contains two curved Teflon strips that line the front bulkhead where the drum rides. Over thousands of cycles, heat and friction wear these bearings down to nothing, leaving the drum rim dragging directly on the metal housing. That's when you get the grinding, scraping, or squealing during operation — sometimes loud enough to hear from another room. The 306508 kit is a straightforward fix, but here's the thing: while you've got the dryer disassembled to replace these bearings, you should seriously consider swapping the drum support rollers at the same time. They wear out on the same timeline, and you don't want to tear the machine apart twice in six months because the rollers failed after you only fixed the glides. The kit installs on the front bulkhead with screws or clips depending on your model year, and you'll need to pull the drum forward to access the mounting points. Budget about an hour if you're methodical and have basic tools.

Compatible Maytag Dryer Models

This bearing kit fits the following Maytag dryer models. If your model number isn't listed but starts with LDE, MDE, or MDG, check the full compatibility data or contact us — there are over 200 confirmed fits.

• LDE Series: LDE8506ACE, LDE9316ADE, LDE7304AGE, LDE7304AGL, LDE7304AGM, LDE7314ACE, LDE7314ACL, LDE7800XBL, LDE7800XBN, LDE7800XBQ, LDE8624DCE, LDE8624DCL, LDE9316BGE, LDE9316BGL, LDE9316BGN, LDE9806ACE, LDE9806ACL
• MDE Series: MDE8757AYW, MDE7758AYQ, MDE9806AYW, MDE6400AYW, MDE3500AYW, MDE21PNDYW, MDE6000AYW, MDE5500AYW, MDE22PDDYW0, MDE8957AYW
• MDG Series (Gas): MDG6000BWW, MDG6400AWW, MDG5500AWW, MDG6000AWW, MDG25PDNYW0, MDG6700AWW

Installation Considerations

You'll need to remove the front panel and lift the drum out of the cabinet to access the old bearings. They're usually held in place with small screws or metal clips — pry the old ones off carefully because the brittle Teflon can shatter if it's really worn. Clean the bulkhead surface before installing the new bearings; any debris or old adhesive residue will prevent proper seating. And again, if those drum rollers look even slightly flattened or feel rough when you spin them, replace them now. You're already 90% of the way there, and the labor overlap makes it a no-brainer.

Order Your Replacement Bearing Kit

The 306508 front glide bearing kit is in stock at $19.99 with fast shipping. It's a direct OEM-equivalent replacement for Maytag part numbers AP4037304, 306508VP, PS1804752, and 312941. If you're unsure about compatibility or need help identifying your model, reach out — we've been helping DIYers fix their dryers for two decades, and we'll make sure you get the right part the first time.