







The evaporator fan motor circulates cold air through the fresh food compartment. When it fails, the fridge section warms up even though the compressor is still running.
A failed evaporator fan stops airflow over the cooling coils, causing the freezer to lose temperature and food to begin thawing.
Worn motor bearings cause a grinding, buzzing, or rattling noise from the back wall of the freezer. Replacing the motor eliminates the noise immediately.
On single-evaporator models, one failed fan motor affects both compartments simultaneously, causing warm temperatures throughout the entire refrigerator.





💡 Pro Tip: How to Confirm Your Evaporator Fan Motor Has Failed
Your part is likely the culprit if you notice any of the following:
⚠️ Refrigerator or freezer section is warmer than normal despite the compressor running
⚠️ Loud grinding, buzzing, or squealing noise coming from the back of the freezer compartment
⚠️ Fan blade does not spin freely when turned by hand — indicates worn-out bearings
⚠️ Motor shows no continuity on multimeter test across windings — motor is electrically open
🔍 Tech Tip: Open the freezer door and press the door switch manually. If the fan does not start spinning within a few seconds, the motor is likely failed. Always unplug the refrigerator before accessing the evaporator fan — it sits behind the rear panel of the freezer compartment, typically behind the ice maker assembly.
📦 What's in the Box
✅ 1× Evaporator Fan Motor 240369701 (120V / 60Hz / 0.135A / 3000RPM, 1-3/4" shaft)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.