Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer fills, drains, and pumps water but the drum does not spin during the spin cycle — a broken or stretched drive belt is the primary cause.
Drum fails to oscillate during the wash cycle; clothes sit in soapy water without movement. A snapped or slipping belt stops torque transfer from the motor.
A glazed or slipping belt creates a high-pitched squeal and a burning rubber odor during operation — replace before the belt fails completely.
Water is pumped out correctly but the drum remains stationary at the end of the cycle, leaving clothes soaking wet — classic symptom of a failed drive belt.
💡 Pro Tip: Is Your Drive Belt the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Washer fills with water and pumps out, but drum does not spin or agitate
⚠️ Loud squealing, burning rubber smell, or slapping noise during the wash or spin cycle
⚠️ Drum rotates very freely by hand with almost no resistance (broken belt)
⚠️ Visible cracking, fraying, glazing, or chunks missing from the belt surface
Quick check: Unplug the washer, tip it back or onto its side, and shine a flashlight at the pulley area. If the belt hangs loose, is snapped, or has rubber residue caked on the cabinet floor — replace it immediately. Also inspect the motor pulley and drum pulley for wear grooves while you have access.
📦 What's in the Box
✅ 1× Washer Drive Belt — 52" circumference ribbed rubber (replaces WP22003483 / 22003483)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.