Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Worn or cracked pulley slot causes the drive belt to slip, preventing the drum from reaching spin speed or spinning at all.
A damaged spin & agitate pulley breaks the mechanical link between the motor and agitator, causing the agitator to sit idle during the wash cycle.
A deformed or cracked plastic pulley creates belt misalignment, producing squealing, thumping, or grinding sounds throughout the cycle.
A worn slot profile no longer grips the belt securely, causing the belt to ride off the pulley repeatedly even after being reseated.
A cracked or out-of-round pulley introduces imbalance into the drivetrain, resulting in abnormal vibration or the machine walking during spin.
💡 Pro Tip: Diagnosing a Worn Spin & Agitate Pulley
Your part is likely the culprit if you notice any of the following:
⚠️ Washer drum fails to spin or spins weakly at end of cycle
⚠️ Agitator does not move or moves erratically during wash
⚠️ Loud squealing, grinding, or thumping noise during operation
⚠️ Drive belt slips off or shows unusual wear on one side
Before ordering, visually inspect the pulley for cracked or missing teeth, a worn-out slot, or plastic deformation. Rotate it by hand — it should spin freely with no wobble. If the slot is rounded off, the belt will not grip and both spin and agitate cycles will fail even with a new belt installed.
📦 What's in the Box
✅ 1× Spin & Agitate Pulley W/Slot (Part# 202795, Black Plastic, 0.3 lbs)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.