Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dishwasher starts a cycle but no water enters the tub — the inlet valve solenoid has failed open-circuit.
Water keeps running into the dishwasher and won't stop — valve is stuck open or diaphragm is damaged.
Water drips from beneath the unit even when idle — valve body or internal seals have deteriorated with age.
Bosch flood-protection code triggered by water accumulating in the base pan, often caused by a slow-leaking inlet valve.
Pump cycles non-stop because leaked water from a faulty valve activates the float switch in the drip tray.
💡 Pro Tip: How to Know If Your Water Inlet Valve Has Failed
Your part is likely the culprit if you notice any of the following:
⚠️ Dishwasher won't fill with water at all during the wash cycle
⚠️ Dishwasher fills continuously and overflows — valve stuck open
⚠️ Water drips or leaks underneath the appliance when not running
⚠️ E15 error code displayed — drain pump runs constantly due to water in base tray
🔍 Quick test: Turn off the water supply and run a cycle. If the machine still shows water-related errors or the drain pump keeps cycling, suspect the inlet valve. A multimeter check of the solenoid coil (should read 200–500Ω) will confirm a faulty valve.
📦 What's in the Box
✅ 1× Dishwasher Water Inlet Valve (110–120V / 60Hz, fits Bosch & Thermador)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.