Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer fills with water and hums but the drum does not move — a worn or broken drive belt is the most common cause.
Washer pumps out water but the drum fails to spin or spins too slowly to extract water from clothes.
A slipping or glazed belt generates heat and a distinctive burnt rubber odor during the wash or spin cycle.
A stretched, cracked, or frayed belt slips on the pulleys and produces high-pitched squealing or thumping during operation.
An unevenly worn belt causes irregular drum rotation, leading to vibration and movement of the machine during the spin cycle.
💡 Pro Tip: How to Tell Your Drive Belt Has Failed
Your part is likely the culprit if you notice any of the following:
⚠️ Washer fills with water but drum will not agitate or spin
⚠️ Strong burning rubber smell during or after a wash cycle
⚠️ Loud squealing, grinding, or thumping noise during spin
⚠️ Visible cracks, glazing, or fraying on the existing belt
🔍 Technician Tip: If the belt burns through quickly after replacement, inspect the idler pulley and motor pulley for wear, misalignment, or seized bearings before installing a new belt — a bad pulley will destroy a new belt in a single load.
📦 What's in the Box
✅ 1× Washer Drive V-Belt (134511600) — 32-1/4"L × 1/2"W × 5/16"H, black rubber, wrapped V-profile
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.