Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
The lid lock signals the control board that the lid is safely closed before a cycle can begin. A failed lock prevents the washer from starting at all.
If the lid lock solenoid or switch contacts fail, the lid will not latch securely and the lock indicator light may blink continuously.
An intermittent lid lock causes the control board to detect an open-lid fault mid-wash, cutting power to the motor and halting the cycle unexpectedly.
The washer requires a confirmed lid-lock signal before entering spin. A defective lock keeps the machine stuck in drain mode with no spin.
F5E2 (Lid Lock Fault) is triggered when the control cannot detect the lid switch opening and closing properly, pointing directly to a failed lid lock assembly.
💡 Pro Tip: How to Confirm the Lid Lock Is Your Problem
Your part is likely the culprit if you notice any of the following:
⚠️ Washer will not start at all even when lid appears closed
⚠️ Washer stops randomly mid-cycle without warning
⚠️ Lid lock indicator light blinks or F5E2 error code is displayed
⚠️ Washer drains but will not advance to the spin cycle
🔬 Quick bench test: Unplug the washer and disconnect the lock at connector J6. Measure resistance between pin 2 and pin 3 with the lid closed — a healthy lock reads 85–155 Ω. An open circuit or 0 Ω reading confirms the lock has failed and needs replacement.
📦 What's in the Box
✅ 1× W11307244 Lid Lock Assembly with integrated bezel and 3-wire harness
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.