Whirlpool Top-Load Washer Lid Lock Assembly Parts — Models & Compatibility

Your Whirlpool top-load washer won't start because the lid lock won't engage — or worse, it's stuck locked with clothes trapped inside. This lid lock assembly (W11307244) is the safety mechanism that secures the lid during spin cycles, and when it fails, your washer becomes a heavy laundry basket. This hub covers compatible models across Whirlpool, Maytag, Amana, and Kenmore washers that use this exact part.

Is This the Right Part for Your Model?

Check your washer's model number before ordering — it's usually on a sticker inside the lid opening or on the back panel near the water connections. This W11307244 lid lock fits the WTW series (like WTW5000DW1, WTW4816FW2, WTW4850HW0) and several MVW models. If your model number starts with WTW4, WTW5, or MVW, there's a strong chance this is your part. It replaces older part numbers W10682535, W10838613, and W11253733, so if you're cross-referencing from an old invoice, those numbers lead here.

About This Replacement Part

The lid lock assembly is a motorized latch that physically locks the washer lid during operation — mostly during high-speed spin cycles when an open lid would be dangerous. When you press start, you'll hear a soft click as the lock engages. If that click never happens, or if the lock clicks but the washer still won't start, the lid switch inside this assembly has likely failed. One important installation note from the manufacturer: this part often ships in the locked position. Don't panic if it arrives that way. Install it as-is, then power up your washer — the machine will automatically reset the lock to the open position during its startup sequence. Trying to force it open before installation can damage the internal motor mechanism.

Common Series Using This Part

The WTW5000 series is probably the most common group needing this replacement, but you'll also find it in WTW4616, WTW4715, WTW4810, and WTW4816 models. Maytag MVW series washers (particularly the Centennial and Bravos lines) use the identical assembly since Whirlpool owns both brands. Kenmore models built by Whirlpool after 2015 also share this part — look for model numbers starting with 110 in the 28" and 29" washer range.

Verify Compatibility

Use the model lookup tool below to confirm this part fits your specific washer. The list includes over 20 verified model numbers, but variations exist within series (the number after the model sometimes indicates color or minor feature changes, not mechanical differences). If your exact model isn't listed but shares the first 8-9 characters with a listed model, it'll likely work — but when in doubt, contact support with your full model and serial number.