Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer motor runs and heats but the drum remains completely stationary — the belt has snapped or slipped off the pulley system.
A worn, frayed, or partially broken belt causes irregular contact with the drum and pulleys, producing squealing, thumping, or slapping sounds during operation.
An overstretched belt loses grip and slips off intermittently, causing the drum to stop rotating unexpectedly during the drying cycle.
If the drum is rotating too slowly or inconsistently due to a slipping belt, clothes will not tumble properly and remain damp even after a full drying cycle.
💡 Pro Tip: Is Your Drum Belt the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer drum does not spin or rotate when the machine is turned on
⚠️ Loud thumping, squealing, or slapping noise during the drying cycle
⚠️ Drum rotates intermittently or stops mid-cycle
⚠️ You can visually see a broken, frayed, or stretched belt when the top panel is removed
🔍 Quick Test: Open the dryer lid and manually rotate the drum by hand. If it spins freely with zero resistance and the motor runs but the drum stays still, the belt is almost certainly broken. Always unplug the dryer before opening the cabinet.
📦 What's in the Box
✅ 1× Dryer Drum Belt (7-rib, 87.6" long — replaces Fisher & Paykel 395048 / AP6790675)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.