Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Belt is broken or snapped — drum turns freely by hand with no resistance. Replacing the belt restores full drum rotation.
A worn, frayed, or slipping belt causes thumping, squealing, or rumbling sounds during the drying cycle.
Some GE models use a belt switch that cuts power if the belt is broken. A snapped belt may prevent the dryer from starting at all.
A stretched or slipping belt causes the drum to rotate slowly, reducing tumbling action and dramatically increasing dry time.
A worn belt dragging against components or partially snapped belt caught on the drum can produce a burning rubber odor.
💡 Pro Tip: How to Tell If Your Dryer Belt Is Bad
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer drum does not spin or rotate at all when started
⚠️ Loud thumping, squealing, or rumbling noise during operation
⚠️ Drum tumbles unevenly or stops mid-cycle
⚠️ Belt visibly frayed, cracked, or snapped when you open the cabinet
🔍 Quick Check: Open the dryer door and try spinning the drum by hand. If it spins freely with zero resistance, the drive belt is almost certainly broken. A good belt will offer slight tension as the drum turns.
📦 What's in the Box
✅ 1× Dryer Drum Drive Belt (89-1/2 in. long, 4 ribs, compatible with WE12M29 / WE03X29897)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.