Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Fridge compartment is warm while freezer stays cold — failed condenser fan stops airflow over the coil, causing uneven temperatures throughout.
Worn motor bearings produce grinding, screeching, or rattling sounds from the back of the refrigerator, especially noticeable when the compressor cycles on.
Without condenser fan airflow, the compressor overheats and either runs non-stop or shuts off on thermal overload, spiking energy bills and shortening compressor life.
The fan blade does not rotate when the compressor is running, indicating a seized or electrically failed motor that requires immediate replacement.
💡 Pro Tip: Is Your Condenser Fan Motor to Blame?
Your part is likely the culprit if you notice any of the following:
⚠️ Refrigerator not cooling properly while freezer stays cold
⚠️ Loud grinding, screeching, or rattling noise from behind the fridge
⚠️ Refrigerator runs constantly or compressor overheats and shuts off
⚠️ Condenser fan blade spins freely by hand but motor won't run when powered
🔍 Diagnostic Tip: Pull the fridge away from the wall and remove the rear access panel. With the unit plugged in, observe whether the condenser fan blade is spinning. A seized or intermittently spinning motor is a clear sign of failure. Use a multimeter to check for continuity across the motor windings — no continuity confirms the motor is defective and must be replaced.
📦 What's in the Box
✅ 1× Condenser Fan Motor with Blade (115V / 60Hz / 2.6W, 4-Pin Connector)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.