





A torn, clogged, or warped lint filter restricts airflow through the drum. Replacing the W10828351 assembly restores full airflow and normal drying times.
Blocked airflow from a damaged lint screen causes the thermal fuse or hi-limit thermostat to trip prematurely. A new filter prevents this chain-reaction failure.
Holes or tears in the mesh screen allow lint to bypass the filter and accumulate inside the blower housing, increasing fire risk. Replace the full assembly immediately.
A cracked or broken filter cover can expose sharp plastic edges or allow lint to re-deposit onto garments during the drying cycle.
A loose or cracked lint filter cover that no longer clips securely can vibrate against the dryer housing, producing rattling noises during operation.





💡 Pro Tip: Is Your Lint Filter the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Clothes taking longer than one cycle to fully dry
⚠️ Visible cracks, tears, or holes in the lint screen mesh
⚠️ Lint escaping into the dryer drum or collecting around the door seal
⚠️ Dryer running noticeably hotter than normal or shutting off on thermal overload
🔍 Technician Tip: Hold the lint screen up to a light source — if light passes through unevenly or you see torn mesh, replace immediately. Also check that the cover clips engage all four corners; a loose cover allows lint bypass even with an intact screen.
📦 What's in the Box
✅ 1× Dryer Lint Filter and Cover Assembly – W10828351 (kidney-shaped, steel mesh screen + rigid plastic cover with 4-clip frame)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.