





Timer fails to advance the cycle selector, causing the machine to stay stuck in one phase indefinitely.
Machine abruptly halts during wash, rinse, or spin before completing the full cycle, leaving clothes wet.
Rinse or spin functions activate at wrong times or out of sequence due to faulty internal timer switches.
Turning the cycle selector dial produces no response; the drum does not fill or begin agitating.
The wash cycle ends too early, leaving clothes insufficiently washed or still soaking in water.
Timer sticks in a single phase — fill, wash, or rinse — causing abnormally long cycles or failure to drain and spin.




💡 Pro Tip: How to Confirm a Faulty Washer Timer
Your part is likely the culprit if you notice any of the following:
⚠️ Washer gets stuck in one cycle phase and the dial won't advance automatically
⚠️ Machine stops mid-cycle and clothes are left soaking in water
⚠️ Rinse or spin activates out of order or at random without input
⚠️ Cycle ends too early — machine drains before completing wash or rinse
🔍 Technician's Tip: Set a multimeter to continuity mode and probe each timer terminal pair while slowly rotating the dial through positions. Any terminal that shows no continuity when it should be closed confirms an internally burned or worn switch contact — replace the timer. Note: timers are frequently misdiagnosed; also check the lid switch and water inlet valve before ordering.
📦 What's in the Box
✅ 1× Washer Control Timer (W10199989 / WPW10199989 compatible, 60 Hz, Top Load)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.