Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Lower dishrack is stiff, sticky, or requires excessive force to pull out or push in — caused by a cracked, broken, or worn wheel assembly that no longer rolls properly on the rails.
Loud grinding, scraping, or rattling sound when opening or closing the lower rack — indicates a damaged wheel with a broken rim or a missing retaining tab causing metal-on-metal contact.
Lower dishrack tilts to one side, drops, or seems unbalanced during use — typically caused by one or more broken or missing wheel assemblies that no longer support the rack frame evenly.
Dishes on the lower rack come out dirty — a stuck or misaligned rack can prevent the spray arm from rotating correctly, reducing wash coverage across the lower load.
💡 Pro Tip: How to Know Your Dishrack Wheel Needs Replacing
Your part is likely the culprit if you notice any of the following:
⚠️ Lower dishrack feels stiff, sticky, or difficult to pull out and push in
⚠️ Grinding, scraping, or rattling noise when rolling the rack in or out
⚠️ Rack sits unevenly or tilts to one side during use
⚠️ Visible cracks, chips, or a wheel that has completely broken off the rack frame
🔍 Diagnostic tip: Pull the lower rack out fully and flip it upside down. Inspect all four wheel assemblies — they are located at the corners of the rack frame. If any wheel is cracked, missing its retaining tab, or spins unevenly, replace all four at the same time since they wear at the same rate. The snap-in connector tends to become brittle over time from repeated heat exposure.
📦 What's in the Box
✅ 1× W10195416 Lower Dishrack Wheel Assembly — Gray ABS Plastic (approx. 1.59" W × 2.83" H) — Note: 4 required for a complete rack replacement, sold individually
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.