Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer refuses to begin any cycle because the control board cannot confirm the lid is locked; replacing the lid lock assembly restores the start signal.
A failing lid lock intermittently loses contact during agitation or spin, causing the washer to pause or abort the cycle unexpectedly.
Control panel displays a lid or door error code (dE / LE) indicating the lock mechanism is not engaging or the switch signal is absent.
The mechanical latch inside the assembly wears out, preventing the lid from clicking into the locked position and blocking cycle operation.
💡 Pro Tip: How to Diagnose a Failed Lid Lock on LG WTL Washers
Your part is likely the culprit if you notice any of the following:
⚠️ Washer will not start any cycle even though the lid appears fully closed
⚠️ Washer stops mid-cycle and displays a lid error or lock error code
⚠️ Lid feels loose or fails to click into the locked position during spin
⚠️ Control panel shows cycle complete but lid lock LED remains lit or flashing
Use a multimeter set to continuity mode: disconnect the lid lock connector and test across the switch terminals while manually actuating the latch. You should get continuity when closed and open circuit when open. No continuity in either state confirms the assembly is faulty and needs replacement.
📦 What's in the Box
✅ 1× Lid Lock Assembly (EBF64556603 compatible, with wiring connector)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.