Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer drum does not fill with water or fills extremely slowly during a cold or warm cycle due to a clogged or failed cold-side solenoid valve.
Water drips or streams from the back of the machine at the cold-water inlet connection, indicating a cracked valve body or failed internal seal.
Water enters the drum non-stop even when the washer is idle or powered off, caused by a stuck-open solenoid that can no longer close fully.
Selecting a warm or hot wash cycle only delivers cold water because the cold solenoid coil has burned out and cannot open on command.
Samsung washer displays water-fill or temperature-related fault codes (e.g., 4E, 4C, tE) triggered by insufficient or absent cold-water flow through a defective inlet valve.
💡 Pro Tip: How to Confirm Your Cold-Water Inlet Valve Has Failed
Your part is likely the culprit if you notice any of the following:
⚠️ Washer fills very slowly or not at all on a cold-water cycle
⚠️ Water continues to enter the drum even after the washer is unplugged (valve stuck open)
⚠️ Visible water dripping or pooling beneath the rear of the machine near the inlet connections
⚠️ Warm-water setting only delivers cold water (cold solenoid coil has failed)
🔬 Technician's test: Set your multimeter to resistance (Ω) and probe the cold solenoid coil terminals on the valve. A healthy coil reads approximately 500–1,500 Ω. An open circuit (OL) or near-zero reading confirms a failed solenoid — replace the valve.
📦 What's in the Box
✅ 1× Cold-Side Water Inlet Valve Assembly (DC62-00266G, 110V/127V 50/60Hz, solenoid-operated)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.