Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer runs normally but produces no heat or not enough heat to dry clothes.
Dryer gets excessively hot, clothes come out extremely hot, or the HE error code appears.
Dryer cycle ends prematurely before clothes are fully dry, or shuts down unexpectedly mid-cycle.
Normal loads require multiple cycles to dry, indicating improper heat regulation.
💡 Pro Tip: Diagnosing a Faulty High Limit Thermostat
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer runs but produces no heat or not enough heat
⚠️ Dryer overheats — clothes come out extremely hot
⚠️ Drying cycle ends too soon or dryer shuts off unexpectedly
⚠️ Dryer takes too long to dry a normal load
Use a multimeter set to continuity mode. At room temperature the thermostat should show a closed circuit (continuity). If your meter reads open/no continuity, the high limit thermostat has tripped and must be replaced. Always check and clear your exhaust vent before replacing — a blocked vent is the #1 cause of repeat thermostat failure.
📦 What's in the Box
✅ 1× High Limit Thermostat DC47-00018A (L260-50F, 125/250V, ¼" spade terminals)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.