Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer or washer vibrates loudly or shakes during spin cycle due to a worn, cracked, or missing leveling foot that can no longer maintain proper contact with the floor.
Unit creeps or moves across the floor during operation because one or more feet are damaged and unable to provide stable, level support.
Machine rocks side-to-side or front-to-back because a leveling foot has broken off, stripped, or worn down unevenly, causing the base to be unlevel.
Rhythmic thumping noise during operation caused by an imbalanced drum resulting from the appliance sitting unevenly on worn or missing leveling feet.
💡 Pro Tip: Is Your Leveling Foot the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer or washer vibrates excessively or shakes loudly during the spin cycle
⚠️ Appliance "walks" or creeps across the floor during operation
⚠️ One or more corners rock when you push down on the top of the machine
⚠️ A leveling foot is visibly cracked, broken, or missing entirely
Place a bubble level on top of the appliance. If it reads off-level even after adjusting the threaded legs, inspect all four feet for wear, rounding, or stripping — a worn foot can no longer hold its adjusted height and will cause persistent imbalance. Replace all damaged feet at the same time to restore stable operation.
📦 What's in the Box
✅ 1× Dryer / Washer Leveling Leg Foot (White Plastic/Nylon, ~1" dia. × 1-3/4" long) — sold individually; order quantity 4 to replace a full set
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.