Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
The most common failure: the belt breaks from normal wear, causing the drum to stop turning entirely while the motor continues to run. Replacing belt 341241 restores drum rotation immediately.
A stretched or snapped drive belt prevents the drum from tumbling, leaving clothes damp and stationary. A new belt restores proper tumbling action and drying performance.
A worn, fraying, or partially torn belt can produce loud squealing, thumping, or scraping noises as it slips on the drum or pulley before it breaks completely.
When the belt breaks, some dryer models continue to run the heating element while the drum sits stationary, creating a potential overheating condition. Replacing the belt resolves this safety issue.
💡 Pro Tip: How to Tell If Your Dryer Belt Is Broken
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer runs and heats but the drum does not spin or tumble
⚠️ You can hear the motor running but clothes remain stationary
⚠️ Drum spins very freely and effortlessly by hand with no resistance
⚠️ Loud screeching or thumping noise just before the drum stopped turning
🔍 Quick field test: Open the dryer door and try spinning the drum by hand. If it spins with almost zero resistance, the belt is broken. Visually confirm by reaching behind the drum — a snapped belt will be loose or piled at the bottom of the cabinet. While the dryer is open, inspect the idler pulley and drum support rollers and replace them at the same time if worn.
📦 What's in the Box
✅ 1× Dryer Drum Drive Belt 341241 (92-1/4" × 1/4", 4-Rib / 3-Groove, Black Rubber)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.