Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer runs normally but produces no heat — the high limit thermostat has tripped or failed open, cutting power to the heating element permanently.
Dryer runs excessively hot, scorching or over-drying clothes because the thermostat is not regulating temperature correctly.
Dryer repeatedly stops before the cycle is complete due to the thermostat tripping too frequently from restricted airflow or a failing component.
Clothes require two or more cycles to fully dry because the thermostat is cutting out too early or intermittently interrupting heat.
💡 Pro Tip: Diagnose Your High Limit Thermostat
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer runs but produces no heat at all
⚠️ Dryer repeatedly shuts off mid-cycle before clothes are dry
⚠️ Dryer runs extremely hot and scorches clothes
⚠️ Dryer takes two or more full cycles to dry a normal load
🔬 Use a multimeter set to continuity mode: remove the thermostat and probe both terminals. A good thermostat reads continuity at room temperature. An open (no continuity) reading confirms the part has failed and needs replacement. Always check lint filter and venting for blockage first — restricted airflow is the #1 cause of premature thermostat failure.
📦 What's in the Box
✅ 1× High Limit Thermostat L260-70F (replaces OEM 3204267)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.