





Lower rack requires excessive force to push in or pull out, or catches and jerks during movement due to worn, cracked, or missing wheels.
Rack makes scraping, grinding, or squeaking sounds when sliding — caused by a damaged wheel rolling unevenly or a missing wheel dragging the rack frame on the tub floor.
One side of the lower rack dips lower than the other, causing dishes to shift or tip during the wash cycle — a classic sign of one or more broken or missing rack wheels.
The lower rack slips off its track or becomes misaligned during use because the locking clip on the wheel is broken or the wheel itself has shattered, removing proper rack guidance.





💡 Pro Tip: Is Your Rack Wheel the Culprit?
Your part is likely the culprit if you notice any of the following:
⚠️ Lower rack does not slide in and out smoothly — requires extra force to push or pull
⚠️ Scraping, grinding, or squeaking noise when moving the rack
⚠️ Rack tilts, sags, or becomes misaligned — one side lower than the other
⚠️ Visibly cracked, chipped, or missing wheel — rack dragging directly on the tub floor
🔍 Diagnostic Tip: Pull out the lower rack completely and flip it over. Inspect each wheel for cracks, flat spots, or missing clips. A healthy wheel should spin freely on its axle with no wobble. If one is damaged, replace all wheels on the same side at minimum — always in pairs for even wear.
📦 What's in the Box
✅ 1× Bosch-Compatible Lower Rack Wheel with Locking Clip (Gray ABS, 1.42" dia × 1" H) — Axle not included (integrated into rack frame)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.