Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer motor runs and you can hear it humming, but the drum does not rotate and clothes sit still inside the drum.
A worn, frayed, or slipping belt creates loud thumping, squealing, or slapping sounds during a drying cycle.
A loose or partially broken belt causes the drum to rotate sluggishly or intermittently, leaving clothes damp after a full cycle.
A belt on the verge of breaking may cause the drum to stall intermittently, triggering the motor thermal overload and shutting the unit off unexpectedly.
💡 Pro Tip: Is Your Drum Belt the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer turns on and motor hums, but drum does not spin or tumble
⚠️ Loud thumping, squealing, or slapping noise during operation
⚠️ Clothes take much longer than normal to dry
⚠️ Dryer stops unexpectedly mid-cycle
Quick field test: Open the dryer door and try to spin the drum by hand. If it spins with almost zero resistance (very freely), the belt is almost certainly broken. Visually confirm by looking inside — a broken belt will be visible lying loose at the bottom of the drum cabinet.
📦 What's in the Box
✅ 1× Multi-Rib Drum Drive Belt (89-1/2" L × 1/4" W × 1/8" H, 4-rib, rubber)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.