How to Replace 240338001 Refrigerator Door Shelf Bin on Frigidaire — Step-by-Step

You reach for the milk and the door bin crashes to the floor — again. That cracked or broken door shelf bin isn't just annoying, it's risking your groceries every time you open the fridge. The good news? This is one of the simplest refrigerator repairs you'll ever do, and you won't need a single tool.

What You Need Before Starting

This is possibly the easiest appliance repair you'll tackle. Here's what you need:

• Tools required: None — this is a tool-free replacement
• Repair time: Less than 15 minutes (honestly, closer to 3 minutes)
• Difficulty level: Easy — Perfect for first-time DIYers
• Parts needed: 240338001 door shelf bin (replaces AP2115859, PS429871, 240338005, 891049)

Safety First

While this repair doesn't involve electricity or sharp edges, always remove any items stored in the bin before attempting removal. Work carefully to avoid scratching the door liner, and if the old bin is cracked, watch for sharp plastic edges that could cut your hands.

Step 1: Empty and Identify the Broken Bin

Remove all items from the damaged bin. Check which bin you're replacing — these door shelves come in different sizes for different positions on the door. The 240338001 is a standard size that fits most Frigidaire models including FFHT2126LW3, FFHT2126LS3, and FFHI2126LB2 series.

Step 2: Remove the Old Door Bin

Grasp the bin firmly with both hands. Lift it straight up while pulling slightly forward to disengage the mounting clips from the door liner. The bin should slide up and out of the retaining brackets. If it feels stuck, don't force it — wiggle it gently side to side while lifting. The clips are designed to hold tight, so a firm pull is normal.

Step 3: Inspect the Door Liner Brackets

With the old bin removed, look at the mounting brackets on the door. These are the plastic supports that hold the bin in place. Make sure they're not cracked or damaged. If they are, you'll need to order those separately. Clean any spills or debris from the brackets before installing the new bin.

Step 4: Install the New 240338001 Bin

Line up the new bin's rear mounting slots with the door brackets. Angle the bin slightly, insert the bottom edge into the lower bracket first, then push the top into place. You'll hear a satisfying click when it seats properly. As one customer put it: "When I received my part took me about 3 sec. I snapped it in place refrigerator fixed." Give it a firm tug to ensure it's locked in — it shouldn't budge.

Step 5: Test the Installation

Load the bin with a few lighter items first to test the hold. Open and close the refrigerator door several times to make sure the bin doesn't rattle or shift. The door should close smoothly without any interference from the new bin. If you hear clicking or grinding noises when opening the door, the bin may not be fully seated.

Testing After Installation

Once installed, test with progressively heavier items. Start with condiment bottles, then move to heavier items like juice containers. The bin should hold firm without sagging or pulling away from the door. Check that the door seals properly — a misaligned bin can sometimes interfere with the door gasket, causing warm spots in your fridge.

Frequently Asked Questions

Will this bin fit my Frigidaire model if it's not listed?

The 240338001 fits dozens of Frigidaire, Electrolux, Gibson, and Kenmore models. Check your refrigerator's model number (usually on a sticker inside the fridge or on the back) against the compatibility list. This part also replaces several older part numbers including AP2115859 and PS429871, so if your manual lists those, you're good to go.

Why does my door bin keep cracking in the same spot?

Overloading is the main culprit. These bins are rated for condiments and lighter items, not gallon jugs or heavy glass bottles. If your household consistently loads heavy items in the door, consider moving them to interior shelves. Temperature stress from warm items placed directly in the bin can also cause cracking over time.

Can I install this without removing items from the fridge door?

Technically yes, but it's not smart. You need both hands free to properly align and snap the bin into place. Plus, if you drop the old bin while removing it, you don't want a domino effect taking out your BBQ sauce collection. Just spend 30 seconds clearing the area — your floor will thank you.