Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer does not fill with water or takes excessively long to complete the fill cycle
Washer keeps filling and won't stop — valve solenoid stuck open causing overflow risk
Loud humming, buzzing, or hammering noise heard when washer is filling with cold water
Cold water leaks from the back of the machine at the inlet valve hose connection point
💡 Pro Tip: Is Your Cold Water Inlet Valve Failing?
Your part is likely the culprit if you notice any of the following:
⚠️ Washer won't fill with water or fills extremely slowly
⚠️ Machine continues to fill without stopping (valve stuck open)
⚠️ Loud humming or vibrating noise during the fill cycle
⚠️ Visible water leaking from the back of the washer near the inlet connection
🔍 Quick Test: Set your multimeter to Rx100 and probe the solenoid terminals. A healthy cold water inlet valve solenoid reads between 200–500 ohms. An open or shorted reading (0Ω or OL) confirms the valve needs replacement. Always unplug the washer and shut off the water supply before testing or replacing.
📦 What's in the Box
✅ 1× DC62-00311F Cold Water Inlet Valve — Dual Solenoid, 110/120V 60Hz, 3-1/8"L × 2-1/4"W × 2-7/16"H
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.