Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer has power and controls respond but pressing Start does nothing — faulty lid switch fails to signal the control board that the lid is securely closed.
Control panel displays DL (Door Lock) error code, indicating the lid switch is not confirming a closed and locked lid to the main board.
Washer halts or resets during the wash or spin cycle, especially when the machine vibrates, due to intermittent micro-switch contact inside a worn lid switch.
Tub fills normally but drum refuses to spin or agitate because the lid switch is open-circuit and the control board blocks motor operation as a safety measure.
💡 Pro Tip: Diagnosing a Faulty Lid Switch on LG Top-Load Washers
Your part is likely the culprit if you notice any of the following:
⚠️ Washer fills with water but drum will not spin or agitate
⚠️ DL (door lock) error code displays on the control panel
⚠️ Cycle stops or restarts when the lid is bumped or jostled
⚠️ Start button is unresponsive even though all other controls work
🔍 Use a multimeter set to continuity mode: with the lid closed the switch should show continuity; with the lid open it should read open circuit. No continuity when closed = replace the switch. If the DL code persists after replacement, also check control board EBR76262102 for faults.
📦 What's in the Box
✅ 1× EBF61215202 Washer Lid Switch Assembly (DC 16V / 0.95A, direct plug-in replacement)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.