Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Washer tub does not fill or fills only with a trickle during the wash cycle due to a failed solenoid coil or clogged valve body.
Washer fills with cold water only or hot water only regardless of the temperature selected, indicating one solenoid coil has failed.
Washer keeps filling after the cycle begins or won't stop filling because the valve solenoid is stuck open.
Visible water leak near the rear inlet connection caused by cracked valve body or deteriorated internal seals.
Wash tub fills to inconsistent levels cycle to cycle, resulting in poor wash performance or excessive vibration from unbalanced loads.
💡 Pro Tip: Is Your Water Inlet Valve the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Washer tub fills too slowly, only trickles, or won't fill at all
⚠️ Cold-only or hot-only water regardless of temperature setting
⚠️ Washer continues to fill even after the cycle ends (valve stuck open)
⚠️ Visible water leak from the back inlet connection area
🔍 Technician Tip: Before replacing, shut off water supply and use a multimeter to test each solenoid coil for continuity (~500–1500 Ω). No continuity = failed coil. Never attempt to clean a clogged valve — internal debris damages the seat and replacement is the correct fix.
📦 What's in the Box
✅ 1× WH13X27314 Dual Coil Water Inlet Valve (Solenoid Valve 2-in-1, hot & cold inlets)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.