Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer drum spins normally but produces no heat — clothes remain completely wet at end of cycle due to a burnt-out or open heating element coil.
Dryer heats weakly or intermittently, requiring two or more full cycles to dry a normal load, caused by a partially failed heating element.
Dryer runs excessively hot, scorching clothes or tripping the thermal fuse repeatedly, caused by a shorted element coil making continuous contact with the housing.
Replacement thermal fuses burn out within a short time because the underlying heating element is shorted or defective, sending continuous uncontrolled heat.
Samsung dryer displays an HC or heating-related error code indicating the heater assembly is not reaching or is exceeding the target temperature range.
💡 Pro Tip: How to Diagnose a Failed DC93-00154A Heater Assembly
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer runs but produces no heat — clothes remain wet after a full cycle
⚠️ Dryer runs excessively hot and trips the high-limit thermostat or thermal fuse repeatedly
⚠️ Clothes take two or more cycles to dry completely — weak or intermittent heat
⚠️ Dryer displays error codes related to heating (e.g., HC or HE codes on Samsung models)
🔍 Diagnostic tip: Use a multimeter set to continuity/resistance mode. Disconnect power, remove the heater assembly, and test each terminal of the heating element coil. A good element reads approximately 10–15 Ω between the main terminals. If you get an open circuit (OL) or detect continuity between any terminal and the metal housing, the element is shorted or burnt — replace the full DC93-00154A assembly. Also visually inspect the coil for breaks or scorching.
📦 What's in the Box
✅ 1× DC93-00154A Dryer Duct Heater Assembly (240V, 3700W, 3-Terminal, 8-Coil) with L260-50F Hi-Limit Thermostat and Thermal Fuse pre-installed in metal housing
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.