Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
A torn or clogged lint filter restricts airflow through the dryer, causing clothes to take multiple cycles to dry. Replacing the filter restores proper airflow and drying efficiency.
When the lint filter is blocked or damaged, heat cannot escape properly, causing the dryer to overheat or trip the thermal fuse. A new filter corrects airflow and prevents overheating.
Holes or tears in the mesh screen allow lint to bypass the filter and accumulate inside the drum, exhaust duct, or vent. Replace the filter to stop lint from passing through.
A warped, bent, or damaged lint filter frame may stick in the housing or resist removal. A replacement filter slides in and out smoothly as designed.
💡 Pro Tip: Is Your Lint Filter the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Clothes take longer than normal to dry — a clogged or torn filter restricts airflow
⚠️ Visible tears, holes, or rips in the mesh screen
⚠️ Excessive lint buildup inside the dryer drum or exhaust vent
⚠️ Dryer runs hot to the touch or overheats and shuts off early
🛠 Quick Test: Hold the filter up to light — if you can see daylight through holes or tears in the mesh (not through the weave), it's time to replace it. Also run water over the screen; if water pools instead of flowing through, fabric softener buildup may be blocking airflow — try cleaning first before replacing.
📦 What's in the Box
✅ 1× Dryer Lint Filter / Lint Screen (approx. 12.5" L × 7.75" W, White Nylon Mesh)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.