




Worn pads cannot engage the spin basket — motor runs and drains but tub will not rotate
Partially worn pads slip under load preventing full spin speed
Worn pads generate friction heat and rubber odor during spin
Cracked brake cam driver creates banging or impact sound during spin





💡 Pro Tip: Is the Clutch Your Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Tub spins slowly or cannot reach full spin speed
⚠️ Tub does not spin at all during the spin cycle
⚠️ Burning rubber smell during or after spin
⚠️ Loud banging or clunking during spin — impact noise, not vibration
During spin, open the lid momentarily. A healthy clutch decelerates the tub smoothly. If the tub stops abruptly, slows unevenly, or you smell burning rubber, the clutch pads are gone. Confirm by pulling the transmission and inspecting the clutch band — worn pads will be visibly thin or glazed.
📦 What's in the Box
✅ 1x Clutch Assembly
✅ 1x Brake Cam Driver
✅ 1x Blue Spring (large capacity)
✅ 1x Green Spring (compact)
✅ 1x Retaining Clip
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.