Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Heating element has failed and no longer provides heat during the dry cycle, leaving dishes wet at the end of the wash program.
Wash water stays cold or lukewarm because the element cannot raise water temperature, resulting in poor cleaning performance.
Dishwasher stalls mid-cycle or displays blinking error lights because the control board detects no heat output from the failed element.
Motor and pump run normally but no heat is generated during washing or drying — classic sign of a burned-out sheath heater element.
💡 Pro Tip: How to Know Your Heating Element Has Failed
Your part is likely the culprit if you notice any of the following:
⚠️ Dishes come out wet or cool to the touch after the dry cycle completes
⚠️ Wash water feels cold or lukewarm — dishes are not being cleaned thoroughly
⚠️ Dishwasher gets stuck mid-cycle, blinks error lights, or refuses to finish a full cycle
⚠️ Multimeter reads open-circuit (infinite resistance) across the heating element terminals
🔍 To confirm failure: disconnect power, access the heater at the bottom of the tub, and test continuity across both terminals with a multimeter. A healthy element reads roughly 10–20 Ω. An open (OL) reading confirms the element has burned out and needs replacement.
📦 What's in the Box
✅ 1× Dishwasher Heating Element / Sheath Heater (120V, 1100W, rated to 167 °C) — direct replacement for DD47-00008A
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.